English
  • iimveliso

Isihluzi segumbi lokucoca isilinda ngesandla

Isihluzo segumbi lokucinezela isilinda ngesandla cinezela Umfanekiso obonakalayo
  • Isihluzi segumbi lokucoca isilinda ngesandla
  • Isihluzi segumbi lokucoca isilinda ngesandla

Intshayelelo emfutshane:

I-Manual cylinder compression room filter press ithatha i-hydraulic cylinder + impompo yeoli ye-oyile njengesixhobo sokucofa, esineempawu zesakhiwo esilula, ukusebenza kakuhle, akukho mfuneko yokunikezelwa kwamandla, uqoqosho kunye nokusebenza.Idla ngokusetyenziswa kumatshini wokucoca onendawo yokucoca eyi-1 ukuya kwi-40 m² yokuhluza ulwelo kwiilabhoratri okanye ngomthamo wokusetyenzwa ongaphantsi kwe-0-3 m³ ngosuku.


Khuphela njengePDF

Iinkcukacha zeMveliso

Imizobo kunye neeParameters

Ividiyo

✧ Iimpawu zeMveliso

A. Uxinzelelo lokuhluza＜0.5Mpa
B. Ubushushu bokucoca: 45 ℃ / ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.
C-1.Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti yokucoca nganye, kunye nesinki ehambelanayo.Ukuqukuqela okuvulekileyo kusetyenziselwa ulwelo olungabuyiswanga.
C-2.Indlela yokukhutshwa kolwelo valayo: Phantsi kwesiphelo somxhesho wokucoca, kukho imibhobho emibini ekufutshane yokuphuma, edityaniswe netanki yokubuyisela ulwelo.Ukuba ulwelo lufuna ukufunyanwa kwakhona, okanye ukuba ulwelo luyaguquguquka, luyanuka, lunokutsha kwaye luyaqhuma, kusetyenziswa ukuqukuqela okumnyama.
D-1.Ukukhethwa kwempahla yelaphu lokucoca: I-pH yolwelo imisela imathiriyeli yelaphu lokucoca.I-PH1-5 ilaphu lokucoca i-polyester eneasidi, i-PH8-14 lilaphu lokucoca i-alkaline polypropylene.Ulwelo lwe-viscous okanye okuqinileyo kuyakhethwa ukuba ukhethe ilaphu lokucoca i-twill, kwaye ulwelo olungena-viscous okanye oluqinileyo lukhethwa ilaphu lokucoca elicacileyo.
D-2.Ukukhethwa kwemesh yelaphu lokucoca: Ulwelo lwahluliwe, kwaye inombolo yemesh ehambelanayo ikhethelwa ubungakanani bamasuntswana aqinileyo.Umnatha welaphu lokuhluza uluhlu lwe-100-1000 ye-mesh.Ukuguqulwa kweMicron kwimesh (1UM = 15,000 mesh---kwithiyori).
E. Unyango lwe-Rack surface: ixabiso le-PH lingathathi hlangothi okanye isiseko se-asidi esibuthathaka;Umphezulu wesakhelo sokucinezela isihluzi siqhunyiswa yisanti kuqala, kwaye emva koko sitshizwe nge-primer kunye nepeyinti echasayo.Ixabiso le-PH liyi-asidi eyomeleleyo okanye i-alkaline eyomeleleyo, umphezulu wesakhelo sokucoca isihluzi sifakwe isanti, sitshizwe nge-primer, kwaye umphezulu usongelwe ngentsimbi engatyiwayo okanye ipleyiti yePP.

IsiKhokelo seModeli yesihluzi
Igama lolwelo Umlinganiselo oqinileyo-omanzi(%) Umxhuzulane othe ngqo weizinto eziqinileyo Ubume bezinto eziphathekayo PH ixabiso Ubungakanani besuntswana eliqinileyo(umnatha)
Ubushushu (℃) Ukubuyiselwa kweulwelo/eziqinileyo Umxholo wamanzi weikeyiki yokucoca Ukusebenzaiiyure/usuku Umthamo/usuku Nokuba ulweloingumphunga okanye hayi
Isihluzo segumbi lokucinezela isilinda ngesandla cinezela2
Isihluzo segumbi lokucinezela isilinda ngesandla cinezela3

✧ Inkqubo yokutya

Isihluzo segumbi lokucinezela isilinda ngesandla5

✧ Amashishini ezicelo

I-petroleum, iikhemikhali, amayeza, iswekile, ukutya, ukuhlamba amalahle, i-oyile, ukuprinta kunye nokudaya, ukutywala, i-ceramics, i-metallurgy yemigodi, ukucocwa kwamanzi amdaka kunye nezinye iinkalo.

✧ Isihluzi seMiyalelo yoku-odola

1. Jonga kwisikhokelo sokukhetha ucofa lokucoca, isishwankathelo socofa lokucoca, iinkcukacha kunye neemodeli, khethaimodeli kunye nezixhobo ezixhasayo ngokweemfuno.
Umzekelo: Nokuba ikeyiki yokucoca ihlanjiwe okanye hayi, nokuba amanzi amdaka avuliwe okanye avaliwe,nokuba i-rack iyanyanyeka kwi-corrosion okanye hayi, indlela yokusebenza, njl., kufuneka icaciswe kwiisivumelwano.
2. Ngokweemfuno ezikhethekileyo zabathengi, inkampani yethu inokuyila kwaye iveliseiimodeli ezingezizo ezisemgangathweni okanye iimveliso ezenziwe ngokwezifiso.
3. Imifanekiso yemveliso enikwe kolu xwebhu yeyokureferensiswa kuphela.Kwimeko yotshintsho, thinaayisayi kunika isaziso kwaye owona myalelo uya kuphumelela.

  • Ngaphambili:
  • Okulandelayo:

    • Isihluzo segumbi lokucinezela isilinda ngesandla cinezela6

    ✧ I-Manual Cylinder Filter Cofa

    Umzekelo Indawo yesihluzo(m²) Ubungakanani bePlate
    mm    		 Igumbi
    umthamo (L)    		 Icwecwe leQty
    (iiPC)    		 Ubunzima
    (Ikg)    		 Idimensionmm iyonke) Ubungakanani bokungena
    (a)    		 Indawo yokuphuma/vala
    ubungakanani bokuhamba (b)    		 Indawo yokuphuma / evulekileyo
    ubungakanani bokuhamba
    Ubude(L) Ububanzi(W) Ubude(H)
    JYFPJ-1-380 1 380
    X
    380    		 15 4 430 1100 600 700 DN50 DN50 1/2
    JYFPJ-2-380 2 30 9 490 1390
    JYFPJ-3-380 3 45 14 510 1620
    JYFPJ-4-500 4 500
    X
    500    		 60 9 720 1730 800 900 DN50 DN50 1/2
    JYFPJ-8-500 8 120 19 820 2230
    JYFPJ-10-500 10 150 24 870 2480
    JYFPJ-12-500 12 180 29 920 2730
    JYFPJ-16-500 16 240 36 990 3230
    JYFPJ-15-700 15 700X700 225 18 1150 2470 1100 1100 DN65 DN50 1/2
    JYFPJ-20-700 20 300 24 1250 2770
    JYFPJ-30-700 30 450 37 1600 3420
    JYFPJ-40-700 40 600 49 2100 4120

    ✧ Ividiyo

     

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iimveliso ezinxulumeneyo

    • I-Hydraulic ezenzekelayo yokucoca igumbi lokucoca

      Isihluzi segumbi loxinzelelo lweHydraulic oluzenzekelayo ...

      ✧ Iimpawu zeMveliso A. Uxinzelelo lokuhluza＜0.5Mpa B. Ubushushu bokucoca: 45℃ / ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1.Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti yokucoca nganye, kunye nesinki ehambelanayo.Ukuhamba okuvuliweyo kusetyenziselwa...

      Bona iimveliso ezininzi>
    • Isihluzi seGumbi leSilinda yeNsimbi engenaStainless

      Isihluzi seGumbi leGumbi leSilinda yeNsimbi engenaStainless ...

      ✧ Iimpawu zeMveliso A、Uxinzelelo lokuhluza＜0.5Mpa B、Ubushushu bokucoca:45℃/ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1, Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti nganye yokucoca, kunye nesinki ehambelanayo.Ukuhamba okuvulekileyo kusetyenziswa...

      Bona iimveliso ezininzi>
    • Inkqubo yokucoca igumbi lepleyiti yokutsala icwecwe ngokuzenzekelayo

      Isihluzo segumbi lokutsala ipleyiti ecwangcisiweyo...

      ✧ Iimpawu zeMveliso A. Uxinzelelo lokuhluza＜0.5Mpa B. Ubushushu bokucoca: 45℃ / ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1.Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti yokucoca nganye, kunye nesinki ehambelanayo.Ukuhamba okuvuliweyo kusetyenziselwa...

      Bona iimveliso ezininzi>
    • Abavelisi babonelela ngokuzenzekela isihluzi seGumbi Cinezela i-Pharmaceutic Precision Filtration

      Abavelisi babonelela ngokuzenzekela isihluzi seGumbi...

      ✧ Iimpawu zeMveliso A. Uxinzelelo lokuhluza＜0.5Mpa B. Ubushushu bokucoca: 45℃ / ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1.Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti yokucoca nganye, kunye nesinki ehambelanayo.Ukuhamba okuvulekileyo kusetyenziselwa ...

      Bona iimveliso ezininzi>
    • Incwadi encinci ye-Jack Filter Press

      Incwadi encinci ye-Jack Filter Press

      ✧ Iimpawu zeMveliso A、Uxinzelelo lokuhluza＜0.5Mpa B、Ubushushu bokucoca:45℃/ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1, Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti nganye yokucoca, kunye nesinki ehambelanayo.Ukuhamba okuvulekileyo kusetyenziswa...

      Bona iimveliso ezininzi>
    • Umatshini wokucinezela ucinezelo lokucoca

      Umatshini wokucinezela ucinezelo lokucoca

      ✧ Iimpawu zeMveliso A. Uxinzelelo lokuhluza＜0.5Mpa B. Ubushushu bokucoca: 45℃ / ubushushu begumbi;80℃/ ubushushu obuphezulu;100℃/ Ubushushu obuphezulu.Umlinganiselo wempahla ekrwada yeepleyiti zokucoca ubushushu ezahlukeneyo azifani, kwaye ubukhulu beepleyiti zokucoca azifani.C-1.Indlela yokukhupha - ukuhamba okuvulekileyo: Iifaucets kufuneka zifakwe ngaphantsi kwecala lasekhohlo nasekunene kwipleyiti yokucoca nganye, kunye nesinki ehambelanayo.Ukuhamba okuvuliweyo kusetyenziselwa...

      Bona iimveliso ezininzi>
    Cofa u-enter ukukhangela okanye i-ESC ukuvala